{"product_id":"blade-2026-premium-package-2x72-grinder","title":"Blade 2026 Premium Package: 2x72 Grinder","description":"\u003cp\u003e\u003cstrong\u003eFREE GRINDER STAND $550 Value\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGrinder Stand:\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStand with Castors with Powder Coating:\u003c\/strong\u003e Four 2\" smooth rubber castors are provided with this option in addition to leveling feet. The casters allow the machine to move about a flat level surface. Stand is Powder Coated Black with a Zinc backed Logo plate. Assembly required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Premium Package\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Premium Package includes our tilting chassis, small wheel attachment with rubber coated wheels, Mareko platen, adjustable work rest, and 10” contact wheel.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eChassis kits include all parts and hardware needed for assembly\u003cstrong\u003e.\u003c\/strong\u003e including the following wheels: 2” Platen, 4\" rubber coated Platen, 4” Tracking, and 5” Drive with 5\/8” bore (other sizes can be requested at an additional cost).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMotor Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo Motor:\u003c\/strong\u003e You have the option to source your own motor or use a motor you already have. \u003c\/p\u003e\n\u003cp\u003eNote:\u003c\/p\u003e\n\u003cp\u003ePlease note that Brodbeck Ironworks will not be responsible for providing customer service or warranty support for motors and VFD purchased from another vendor. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSingle Speed 1.5 HP\u003c\/strong\u003e: Works with 110V single phase (household voltage), with On \/ Off Switch. \u003c\/p\u003e\n\u003cp\u003eNote:\u003c\/p\u003e\n\u003cp\u003ePlease note a single speed motor limits the attachments the grinder can support to the Mareko Flat Platen, Small Wheel Attachment, and Large Contact Wheels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVariable Speed 1HP\u003c\/strong\u003e: Works with 110V or 220V single phase voltage. The variable speed control KBAC 24 VFD, includes wiring kit and start\/stop switch. \u003c\/p\u003e\n\u003cp\u003eNote:\u003c\/p\u003e\n\u003cp\u003ePlease note the Waterfall Platen cannot be used with a 1 HP variable speed motor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVariable Speed 2HP: \u003c\/strong\u003eWorks with 110V \/ 115V or 220V \/ 230V single phase voltage. The variable speed control KBAC 27D includes the wiring kit and start\/stop switch. The motor is a 2HP 230\/460V 3-Phase 60 HZ 6.2\/2.9A 3600 RPM TEFC.\u003c\/p\u003e\n\u003cp\u003eNotes:\u003c\/p\u003e\n\u003cp\u003eThe variable speed control also serves as a phase converter needed to operate the 2HP 3 phase motor included in the package.\u003cstrong\u003e YOU \u003cspan style=\"text-decoration: underline;\"\u003eDO NOT\u003c\/span\u003e NEED 3 PHASE VOLTAGE IN YOUR SHOP. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePowering the unit with 110V \/ 115V reduces motor output from 2HP to 1.5HP\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVariable Speed 3HP:\u003c\/strong\u003e Works with 220V single phase only. The variable speed control KBAC 29 includes wiring kit and start\/stop switch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBolt Together Kit or Powder Coated \u0026amp; Assembled:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBolt Together Kit: \u003c\/strong\u003eOur bolt together kit arrives unpainted and unassembled. Grinder can be assembled approximately 2-3 hours going causally. Painting or finishing times will vary. Please keep the number of coats between 1 and 3 for easy assembly. \u003cstrong\u003eVFD and\/or Motor will arrive separately will need to be wired with instructions found here.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePowder Coated \u0026amp; Assembled:\u003c\/strong\u003e These grinders are powder coated, zinc plated, assembled, and tuned in our shop. Minimal final assembly is required due to transportation limitations. The required assembly consist of securing the motor, installing the drive wheel and tracking wheel. The installation should take no more than 10-20 min.\u003c\/p\u003e\n\u003cp\u003eNotes:\u003c\/p\u003e\n\u003cp\u003eVFD and\/or Motor will arrive separately and will be pre-wired and only need to be mounted. (1HP and 2HP VFD motor options will be wired to 110V unless otherwise requested.\u003c\/p\u003e\n\u003cp\u003eChanging the input voltage from 110V to 220V is simple. Move the J1 jumper inside the variable speed control from the 115V position to the 230V position (this is how the ports are labeled) and provide your own 220 plug that matches your outlet.\u003c\/p\u003e\n\u003cp\u003ePlease contact us to verify instructions on 220V wiring before plugging your controller.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGrinder Stand:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo Stand: \u003c\/strong\u003eSupply your own table or pedestal to mount grinder to.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStand with Castors with Powder Coating:\u003c\/strong\u003e Four 2\" smooth rubber castors are provided with this option in addition to leveling feet. The casters allow the machine to move about a flat level surface. Stand is Powder Coated Black with a Zinc backed Logo plate. Assembly required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINCLUDED ATTACHMENTS;\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact Wheel:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e10” Diameter Contact Wheel, Bracket, Arm, and Hardware.\u003c\/p\u003e\n\u003cp\u003eUsed for the fastest general material removal and for hollow ground bevels, and handle shaping.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSmall Wheel Kit: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSmall Wheel Bracket, 3\/4” Wheel, 1” Wheel, 2” Guide Wheel, and Hardware\u003c\/p\u003e\n\u003cp\u003eUsed for small radius curves, texturing, and cleaning the spine and the handle's underside. The rubber coated wheels eliminate the belt bump and provide a smooth and even finish. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMareko Deep Platen\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Mareko Deep Platen is a combination of a flat platen, 4” contact wheel, and slack belt. It was designed by knifemaker Mareko Maumasi to provide maximum value and efficiency as it minimizes tool changes. The extra depth allows the user to work both sides of the platen without the tool arm interfering with the work. This is particularly important when removing stock and when contouring handles. This platen is a great alternative and cost reduction to having a dedicated flat platen and a contact wheel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdjustable Work Rest\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe adjustable Work rest has been designed for maximum tilting in both directions as well as height adjustability. It is great for cutting false edges, bevels, clip points, octagonal handles, and fullers with our fullering tool. The work rest is constructed of 5\/16 and 3\/8 thick plate steel to ensure durability and stability. The double pinch design was chosen to eliminate accidental rotation typically observed with other adjustable tool rest designs that use a round bar and set screws for adjustment. The adjustment handles also allow full adjustment without the need of tools for ease of use and maximum efficiency.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNO welding is required for assembly.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBelts not included.\u003c\/p\u003e\n\u003cp\u003eUse assembly instruction here.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/contact\" target=\"\"\u003e\u003cstrong\u003eContact us\u003c\/strong\u003e\u003c\/a\u003e if you have any questions.\u003c\/p\u003e","brand":"Brodbeck Ironworks","offers":[{"title":"No Motor \/ Bolt Together Kit (unpainted)","offer_id":48333590069403,"sku":null,"price":2362.48,"currency_code":"USD","in_stock":true},{"title":"No Motor \/ Powder Coated and Assembled","offer_id":48333590134939,"sku":"BI-G-2-S-10","price":2709.0,"currency_code":"USD","in_stock":true},{"title":"Single Speed Motor (110V) \/ Bolt Together Kit (unpainted)","offer_id":48333590200475,"sku":null,"price":2771.98,"currency_code":"USD","in_stock":true},{"title":"Single Speed Motor (110V) \/ Powder Coated and Assembled","offer_id":48333590266011,"sku":null,"price":3160.5,"currency_code":"USD","in_stock":true},{"title":"1 HP with VFD (110V or 220V) \/ Bolt Together Kit (unpainted)","offer_id":48333590331547,"sku":null,"price":2996.07,"currency_code":"USD","in_stock":true},{"title":"1 HP with VFD (110V or 220V) \/ Powder Coated and Assembled","offer_id":48333590397083,"sku":null,"price":3909.59,"currency_code":"USD","in_stock":true},{"title":"2 HP with VFD (110V or 220V) \/ Bolt Together Kit (unpainted)","offer_id":48333590462619,"sku":null,"price":3233.98,"currency_code":"USD","in_stock":true},{"title":"2 HP with VFD (110V or 220V) \/ Powder Coated and Assembled","offer_id":48333590528155,"sku":null,"price":3622.5,"currency_code":"USD","in_stock":true},{"title":"3 HP with VFD (220V) \/ Bolt Together Kit (unpainted)","offer_id":48333590593691,"sku":null,"price":3485.98,"currency_code":"USD","in_stock":true},{"title":"3 HP with VFD (220V) \/ Powder Coated and Assembled","offer_id":48333590659227,"sku":null,"price":3874.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0468\/6843\/1003\/files\/PREM_BLADE_2026.png?v=1777570976","url":"https:\/\/www.brodbeckironworks.com\/products\/blade-2026-premium-package-2x72-grinder","provider":"Brodbeck Ironworks","version":"1.0","type":"link"}